DISICHEM
Description
Two-component, 100% solids epoxy system designed to provide dissipative properties in industrial floors where electrostatic charge control is required.• Reliable Electrostatic Control: Keeps charge accumulation within safe ranges, protecting sensitive equipment and components.
• Complete and Uniform System: Primer + topcoat ensure electrical continuity and consistent performance.
• Easy Application: Compatible with roller or trowel application, with suitable drying times and pot life.
• High Durability: Resistant to moderate abrasion and typical environmental conditions.
• Versatility: Suitable for electronics, laboratories, pharmaceutical facilities, hospitals, and data centers.
• Standards and Compliance: Complies with IEC 61340-5-1, providing reliable technical assurance.
Characteristics
Characteristics Type: Dissipative Epoxy System (Primer and Topcoat) Components: Primer E-107: A (epoxy resin) - B (hardener) Topcoat E-407: A (epoxy resin) - B (hardener) Contents: Primer: E-107: A (17.70 kg) - B (3.90 kg) Topcoat: E-407: A (11.10 kg) - B (3.80 kg) Capacity: 36.50 kg Finish: Glossy Environment: IndoorRecommended products
E-101
<strong>100% solids, two-component epoxy primer</strong> for sealing and penetrating the substrate. It acts as an adhesion connector between the concrete and the following layers of the system.
View
E-103
<strong>Fast-curing vapor barrier</strong> for applications in concrete <strong>exposed to high hydrostatic pressure due to high water tables</strong>.
View
E-104
<strong>Two-component, 100% solids, slow-curing vapor barrier</strong>. Improves penetration into concrete. Excellent performance in <strong>high humidity and low temperature conditions</strong>.
View
E-105P
<strong>100% solids, solvent-free, two-component, low viscosity pigmented epoxy primer</strong>. Coloured primer for <strong>decorative and industrial floors</strong>.
View
E-204 HR
<strong>High strength shrinkage-free mortar</strong>. Achieves compressive strengths of over 1,000 kg/cm2. (ASTM D 695-15) Provides <strong>excellent impact and abrasion strength with excellent chemical and mechanical properties</strong>.
View
E-401
<strong>100% solids two-component clear epoxy finish</strong> for <strong>industrial and decorative floors</strong>.
View
E-401 P
<strong>100% solids two-component pigmented epoxy finish</strong> for <strong>industrial and decorative floors</strong>.
View
E-403 P SPA
<strong>Pigmented self-leveling finish for high performance</strong>. Developed to offer greater <strong>mechanical and compression resistance</strong>.
View
E-402 P TOP
<strong>Pigmented epoxy finish, orange peel</strong> for <strong>textured floors</strong>.
View
E-404 N
<strong>High chemical resistance Novolac system</strong>. Designed with <strong>additives</strong> which provide a <strong>smooth texture with good leveling and excellent chemical resistance</strong>.
View